How To Repair A Scratch In A Plastic Bumper

The quickest way to a quality terminate

When it comes to running a successful business, finding the residue betwixt client satisfaction and efficiency tin can exist vital, only doing jobs chop-chop shouldn't come up at the toll of doing them well.

Here, Rapid Repair Specialist Wayne Beardmore, owner of Damage Undone, talks us through how a few simple techniques using Q1 automotive masking products could not only assist with the quality of your textured bumper scratch repairs, merely also save you time in the long run.

Stage i: Sanding and skimming

First and foremost, Wayne likes to brainstorm his repairs by running a line of masking tape along the edge of the bumper.

"Information technology's a uncomplicated job that just takes a couple of seconds," says Wayne, "but it'southward going to save you a lot of time in the long run".

Q1's automotive-specific masking tape flexes neatly effectually the contours of the bumper, enabling you accomplish a clean line and protect the neighbouring panel. Sand downwardly the damaged area ideally at this stage using 120-240 grit sandpaper to ensure the expanse is level and ready to be skimmed, if needed. Then skim the surface area with plastic repair glaze to fill up in any imperfections.

Stage ii: Perfect priming

Adjacent, information technology's important to protect the rest of the panel from grit and overspray. The easiest style to do this is with Q1's Premium Protective Drop Film, which unrolls easily from a masking tape header and sticks to the automobile thanks to a corona treatment which gives it electrostatic properties.

And then it's fourth dimension to prime. Wayne starts by creating a soft border with Q1'due south 13mm Premium Soft Edge Cream Masking Tape, which makes it easy to keep to the afflicted expanse whilst leaving the rest of the machine protected. Q1 products perform brilliantly tape-on-tape, providing the perfect protective border for tricky jobs. Then he tends to utilize Glasurit UV primer and the Telsa Cure UV lamp, which cures the surface in under a infinitesimal.

Stage Iii: Texture

Before texturing, a coat of plastic adhesion promoter is applied to help achieve a more durable repair. Then apply several light layers texture, in this case Fine Tex, remembering to wink off betwixt each coat. In one case the desired texture event has been achieved, the surface may feel a little rough and can be sanded with an 800grit sheet of sandpaper and a soft pad.

Finally the colour can now be applied, blending it out where needed. Damage Undone made the switch to Q1 products afterward experiencing the premium performance quality for themselves – is it time you switched? Find out more than here.

Source: https://www.q1tapes.com/en/blog/automotive/how-to-repair-a-scratched-textured-bumper

Posted by: mendozaoret1966.blogspot.com

Share this post